How do you tell the transponders and cylinders?

First, access authorizations are created on the PC in the locking plan. From there, this information must then be transmitted to the transponders and locking cylinders. This task is performed by the so-called programming device. Only in large systems that are operated online, the programming device is merely required for initial programming of the components. The data is then sent "online" via the network.

Programming of ID media and digital locking components.

Programming device SmartCD

There are three different programming devices in System 3060 for transferring data to the ID media and the locking components: 

  • In active systems, the programming device SmartCD
    transfers the data from the locking plan on transponders and locking components. 
  • To program components in the
    passive SmartCard systems, the SmartCD-MP is also required. 
  • In hybrid systems, i. e. when transponders and SmartCards are used simultaneously
    in one system, the Smart CD and the SmartCD-HF are needed
    to program the active components.

More information and details

Would you like to find out more about our products and product variants?
Browse through the product catalogue or contact your SimonsVoss dealer.

SmartIntego | Mood
SmartIntego | Mood
SmartIntego | Programmierung | Programmiergerät SmartCD
SmartIntego | Mood

Advantages of the SmartCD programming device

  • Simple and secure transfer of access rights from the PC to identification media and locking components